CSC2K heaters are designed to be placed at the bottom of collector trays inside refrigeration equipment in cold rooms, to prevent freezing and to allow condensate water to flow freely. The integrated thermostat makes them fully autonomous. The cables must never be cut to shorten the 1m long cold tail. The round part of the thermostat must be placed in the best position to collect information. Fully sealed. Double insulation. Extremely flexible. Voltage 230V as standard. Permissible surface temperature -40°C to +110°C. NOTE - Heat trace cable must be installed in accordance with current AS/NZS Standards. Please refer to manufacturers instructions before installing Flexelec product.