Asphalt Renew is a 100% New Zealand manufactured product, proudly brought to you by Biosymph Paints and Products. It has been specially formulated to restore toughness, cohesion and depth of colour on asphalt, concrete and cement surfaces. This product is compatible with bitumen and will chemically bond with the original asphalt. This is unlike typical paints which merely form a skin over the surface, causing flaking and delamination. The hard-wearing and durable coverage rendered by this product provides a degree of water repellence to the surface. It kills moss and lichen when applied and retards future growth.

Asphalt Renew has a wide range of uses, including application on driveways, tarmac parking lots, paving blocks, retaining walls, etc.

The surface is to be properly cleaned, dried and repaired before application. This may include filling large potholes or cracks with a suitable product. Minor oil stains, however, do not need to be removed as the product is directly applicable over these areas.

This coating is easy to use due to its low viscosity, and can be applied with a brush or roller. A soft broom may also be used. A re-coat is recommended after 3-4 years.

• Asphalt Renew should be thoroughly mixed before application.
• 1 Litre will cover approximately 1.5 m² depending on the condition of the surface to be coated.
• Only one coat is typically required, dependent on the surface.
• This product becomes touch-dry and will not wash out under light rain after approximately 1.5 hrs.
• It can be driven over after 24 hrs.
• 20 Litres will cover approximately 30-40 m².
• The colour of this product is black.

• Asphalt Renew is available in: 4 ltr, 20 ltr and 200 ltr drums. (Please see our other listings on TradeMe) https://www.trademe.co.nz/stores/biosymph-paints-and-products
• We offer FREE delivery anywhere in New Zealand.

A top quality and affordable product from Biosymph Limited! Unbeatable after-sales service! Manufactured in New Zealand! No middleman direct from manufacturer!