Our Italian made Pressure tanks have a replaceable EPDM Rubber Bladder approved for drinking water.

Aquasystem Tanks is a leading European brand distributed throughout Europe. Still manufactured in Italy, using the highest quality materials, the reliability of a global brand.

Why use a pressure tank? Pressure tanks hold water pressurised. Turn tap on, water flows at pressure without running pump until tank runs out, then pump starts up. Reduces noise, power use, pump cycling from leaks, dripping taps

Reduce noise & pump starts caused by leaks, dripping taps Save Power Increase Pump Life Provide pressurised water during Power Failure (limited to size of tank) A correctly sized tank should store 1L for each litre per min pump can deliver eg: Pump delivers 50LPM = Tank should hold 50L A Tank holds 2/3rds it's volume so 100L Tank = 66L approx Therefore if pump delivers 50LPM, tank should be 100L

Properly sized & maintained bladder life = 40,000 cycles

If the tank is being added to an existing system with a pressure controller, we recommend these tanks are fitted with a manual pressure switch so as to be able to adjust pressure cut in and optimise performance.

VAV60 60L Tank. Approx 40L held at pressure Height 783mm diameter 365mm

Photo 2 shows how tank can be mounted. Pump not included in this product

Construction

Steel tank: Durable epoxy paint finish Max Working Pressure: 10 Bar Max Water Temp: 100C Stainless Steel Flange with BSP Male Thread: 1" Precharge: 1.5 Bar Pump or accessories are not included You need: 3 Way Tee, Flexi Hose, pressure switch (or pressure controller may work if retro fitting), Pressure Gauge. Cut in pressure may need adjusting

1 Year Manufacturing Defect Warranty

Pump & Purify is a NZ owned online Retailer of Water Pumps & Water Purification Equipment operating since 2010. We are trusted Farmlands Card Partners.