Replacement stylus for the Audio-Technica AT3600L cartridge. This elliptical bonded stylus makes it easy to upgrade the sound quality of any turntable equipped with an ATN3600L or ATN3600LC conical stylus, such as the turntables in our popular AT-LP60X series. Modeled after the venerable ATN3600L, which has sold by the millions and been trusted by countless music lovers for more than 50 years, the ATN3600LE features a 0.3 x 0.7 elliptical stylus for enhanced sound quality while remaining reliable and easy to use. Stylus Shape: Elliptical Stylus Dimension: 0.3 x 0.7 mil Stylus Life: Approx. 300 hours Compatible Turntables Audio-Technica turntables: AT-LP60X series, AT-LP60 series, AT-LP2D series, AT-PL300 series, AT-SB727, AT-SB2022, AT-LPGO-BT, AT-PL50. Other brands: Consult the turntable's user manual or contact the manufacturer. Audio-Technica has been perfecting the art of transducer technology since our first handcrafted phono cartridge in 1962. Replacement stylus for Audio-Technica AT3600L cartridge. This ATN3600L styli is compatible with the following cartridges: AT3600

• AT3600L
• AT3601
• AT3651
• AT3650L
• AT3650C
• AT3650
• AT3626. This is also the replacement stylus for turntable models Audio-Technica LP60USB and LP60. Stylus Shape: Conical Stylus Dimension: 0.6 mil To remove old stylus (needle), hold the cartridge in one hand, grasp the plastic stylus housing with thumb and forefinger, and pull away from the cartridge. The stylus assembly comes away at a slight angle, as indicated by the arrow. To install replacement stylus, insert the new stylus assembly into the cartridge at a slight angle, so the hook at the end of the stylus fits into the slot in the cartridge body. The stylus assembly should click into place when fully seated on the cartridge. The stylus must be fully seated on the body for proper operation. Specifications Cartridge & Stylus Vertical Tracking Force 3.0 to 4.0 g (3.5 g standard) Stylus Shape Conical bonded Dimensions 0.6 mil Stylus Life Ap...