NEW IMPROVED 2026 COMBINATION MODEL Extremely versatile cyclic delay timer AND a plug-in 12v, 24v, or 230v digital temperature controller that plugs into any wall socket. No wiring.

Can control a heater, aquarium, incubator, aviary, reptile enclosure, or seed germination heatpad. Or in cooling mode, a fridge or aircon.

Can be setup to turn on then off at the same set times once every day.

And it combines that with a cyclic delay timer so you can
a) turn the thermostat on for a set duration then off after another set duration REPEATING CONTINUOUSLY. b) turn the thermostat on after set duration & leave on c) turn the thermostat off after set duration & leave off d) turn the thermostat on after a set duration then off after after another set duration & stay off

If you only want the cyclic timer function set the thermostat on to -40 deg. If you only want the thermostat function set the timer to turn on after 0 seconds and stay on.

For aquarium use just dip it in the top of the aquarium. For seed germination, insert into the soil. For pet heater use just put it between two blankets on your heat mat. Or just leave it in free air when using it for a simple room heater.

We can supply a low cost plug pack to deliver a switched 12 or 24v supply). Cost depends on amps required. (Pay to bank account).

Thermostat can be set for heating or cooling. Display shows the current temp, & on and off temperatures at all times as a thermostat.

Specs: Temp -40 to +120 deg C Accuracy +-1% Voltage 200 ~ 250V Max load 10A - 2400W Time Duration max 99hrs 59 mins Temperature calibration ability

No wiring means easy setup. Settings are maintained in non-volatile memory when power is off. Good English Instructions.

Before deciding please check my feedback for what others think of these and my other products, service and full support. Money back if not completely happy.

I send multiple purchases combined whenever feasible, and refund excess freight paid without being asked.