The new upgraded model comes with a stronger steel braided hose & no pressure gauge (which isn't necessary - and also less parts to go have possible leaks)

Connect a full size co2 cylinder directly to your soda stream machine! Screw in type - for machines that use a screw in soda stream cylinder (if you have a quick connect machine then click here for the correct hose)

Co2 Cylinder: Buy a Full Size 3kg (1M3) cylinder here from us - Swap when empty at any EziSwap center around NZ

Want to ditch the excessive cost of Soda Stream bottles and the waste associated with it? Purchase the Freedom One High Pressure Sodastream Hose adapter 32inch or 72iinch along with a 3.5KG Co2 Gas bottle (or use your own co2 bottle) for maximum cost savings!

Please Note: This does not come with a CO2 Bottle, Or the SodaStream unit itself.

This fits NZ/AU sodastream bottles only and NZ Co2 cylinders (type 30 or w21.4) not CGA320

With a 3.5KG co2 cylinder you will be able to carbonate over 500L 2Kg cylinder about 300L Refills of the cylinders cost about costing about $25-45

A typical Soda Stream cylinder can only carbonate up to 60L and will cost about $30 per fill. So given these figures the larger cylinder and this hose will pay itself off once you fill your larger gas cylinder once. It's a no brainer!

Setup Options: Free standing or Drilling Through a bench to have the cylinder underneath: We have included two options when drilling through your bench top to fit your hose. Either remove the stainless thread from the brass connection and drill a 14-15mm hole. You will need to use Lock-Tite glue or plumbers tape to get a good seal on this connection after you re-fit it. Without removing the brass connection piece you would need to drill a 30mm hole to fit the bottle connection end through your bench top.

Please Note: This does not come with a CO2 Bottle, Or the SodaStream unit itself.

Usage / Assembly:

• Remove Sodstream stream...