UTS-20B : Ultra Safe with Beeper and Lost Model Alarm.

*. Size (m/m) UTS20A : 21.5 x 15 x 6 *. Fail Safe *. EPA (End point Position Adjustment ) *. WPM (Wireless Programming Mode) *. BEC (Battery Eliminator Circuit )

• Low Battery - programmable.cut-off Voltage. *. Safe Start

Features:

. Ultra-Safe enhances a standard AM/FM radio control system to resemble that of a PCM system.

. Master Control Recognition Technology (MCR) to recognize the Master Transmitter among user transmitters sharing the same RF channel. MCR rejects any other signals from other transmitters and ACTS only on the signal from the Master Transmitter.

. Safe Start. Ultra-Safe does not generate an output signal when Power is turned ON with stick above Preset cut of position, nor if there is an unstable RF signal from the Transmitter and/or there is RF interference. Ultra Safe will not allow Servo/ESC to be activated until the channel's normal operation signal is detected and unit is ACTIVATED by moving the stick below the user Preset (MIN) level.

. Battery Eliminator Circuit (BEC) Programming Voltage cut-off. User can optimize the cut off voltage for BEC alarm.

. End Position Adjustment (EPA). This function is well known among PCM R/C users and those with multi function systems. In plain words, this function limits the arc through which servo moves in either or both direction. Servo does not rotate over the EPA Max Position.

. Digital Glitch Free (DGF) (Optional) refer manual.

. Weak Signal Recovery (WSR) - Patent Pending. Fully automatic without any programming or setting mode.

. Adds a Failsafe to your FM (PPM) system.