LED beacon - amber, multi voltage

You are buying one LED flashing beacon with 30x 1W LED's. Water/weather proof. 12 Month Warranty

Choose from either
Magnet mount, This also includes 2 metal disks than can be bolted to a fibreglass roof. Plug directly into cigarette lighter. Or Bolt mount (Amber only)
This has a bolt mount on the base with a nut so you can secure it to anything. Comes with 30cm wire, no cigarette plug.

The LED's are long lasting with a life span of over 30,000 hours.

Specs: Works with 12v and 24v, (multi voltage) 30x 1W High power LED's with special lens to spread the light 26x selectable patterns with memory Rugged polycarbonate base LED colour AMBER Size 250mm x 175 mm x 45mm high Cable length for magnet mount: 3m Bolt length 20mm Meets ECE R65 Class 1, "E" mark

Install instructions for bolt mount: Mount to desired location. Connect red to positive via a switch so you can turn it on and off. Black to negative Touch the yellow wire to negative for one second to change the mode or connect up a second switch so you can change modes.

This has 2 modes that flash at 4 hertz (to comply with NZTA rules these modes are the only ones that can be used on the road) ECE R65 Class 1 Mode 1, rotating mode Mode 2, Side to side flashing 24 other fast flashing modes for off road use.

USE OF FLASHING LIGHTS AND BEACONS.: https://www.nzta.govt.nz/resources/rules/vehicle-lighting-2004/#x1 and go to Section 11 Flashing lights and beacons

For similar products, please visit the LED BULBS NZ store on Trade Me. Keywords: LED emergency flashing beacon light bar, first responder warning LED green beacon, doctor, medical staff, paramedic

Please note: Courier Post will increase their fees on most courier items by 8.3% from July 1, 2024