Utility Textured Plywood Cladding

• Seconds
• Auction is for 10 Sheets
• 2745 x 1220 (with scarf joint) x 12mm

• 2745 x 1220 with scarf joint. Scarf jointing is a standard method of joining two panels end to end, and is used to manufacture sheets in longer lengths. The scarf is used to join 2440mm long sheets with either a 300 or 600mm extension to produce 2745 or 3050mm length sheets.
• Band-sawn face Ungrooved
• Ship-lapped
• H3.2 ACQ (Alkaline Copper Quaternary) Treated. Suitable for exterior use. Stainless steel fixings and stainless steel or PVC flashings must be used to minimise the possibility of bi-metallic corrosion
• Products marked No2/Reject/Reman/ Downgrade can be rejected/downgraded for any reason. This can be skipping/planning, open knots, out of square.

Picture Example Only

At Renovation Warehouse we have a range of exterior cladding including treated bandsawn and smooth, grooved and ungrooved plywood cladding. We also stock a selection of H3.1 & H3.2 treated weatherboards in a range of different profiles.

All sizes and weights are an Approximate / Nominal / Close size, and/or estimation.

We do not quote on freight as there are too many variables involved.

Please check with your local carriers to get yourself the best price.

Buyer can pick up, however If this auction is to be transported by Toll or a similar freight company these goods WILL need to be strapped with gluts or put on a pallet for freight, as per their requirements. This will incur an extra fee of $35 (including GST).

We recommend you contact Toll (0800 865 569), Mainfreight (09 470 1080) or PBT (0800 367 728).

AUCTION MUST BE PAID FOR WITHIN 3 WORKING DAYS OF AUCTION CLOSING- OTHERWISE GOODS WILL BE PUT BACK INTO STOCK AND RE-AUCTIONED.

Cancellation of the auction in most circumstances will result in negative feedback and blocking from participation in future auctions.

Be sure to check out our other auctions and ‘like’ our Facebook page ‘Renovation Warehouse’!!