Staight Coupling: 16mm, 20mm, 25mm, 32mm

Reducing Coupling: 20X16mm, 25x16mm, 25X20mm, 32x25mm, 32x16mm, 32x20mm

Equal Elbow: 16mm, 20mm, 25mm, 32mm

Unequal Elbow:
20x16mm, 25x20mm

Male Elbow: 16mm x ½’, 20mm x ½’, 20mm x ¾’, 25mm x ¾’, 25mm x 1’, 32mm x 1’

Female Elbow: 16mm x ½’, 16 x ¾’, 20mm x ½’, 20mm x ¾’, 25mm x ¾’

Swivel Female Elbow: 16mm x ½’, 20mm x ¾’

Male Union:
16mm x ½’, 16mm x ¾’, 20mm x ½’, 20mm x ¾’, 25mm x ¾’, 25mm x 1’, 32mm x ¾’, 32mm x 1’, 32mm x 1¼’

Female Union: 16mm x ½’, 20mm x ½’, 20mm x ¾’, 25mm x ¾’, 32mm x 1’, 32mm x 1¼’

Swivel Female Union: 16mm x ½’, 20mm x ¾’

Wingback Female Elbow: 16mm x ½’, 20mm x ½’, 20mm x ¾’, 16mm x ¾’, 25mm x ¾’

Hose Plate: 16mm x ½’

End Cap: 16mm, 20mm, 25mm, 32mm

Equal Tee: 16mm, 20mm, 25mm, 32mm

Unequal Tee: 16x20x16mm, 16x25x16mm, 20x16x20mm, 20x20x16mm, 20x25x20mm, 20x16x16mm, 25x16x20mm, 25x16x25mm, 25x20x20mm, 25x20x25mm, 25x25x20mm, 32x25x32mm, 32x20x32mm, 32x25x25mm

Wingback Male Elbow: 16mm x ½’ x 65mm, 16mm x ½’ x 95mm, 20mm x ½’ x 95mm, 20mm x ¾’ x 95mm, 20mm x ¾’ x 150mm, 20mm x ¾’ x 200mm, 16mm x ½’ x 200mm, 16mm x ½’ x 150mm

Brass Threaded Nippling Tubes ½’ x 300mm, ¾’ x 300mm

Equal Cross: 16mm, 20mm

Anchor Clips: 16mm, 20mm, 25mm, 32mm

MULTEC press fitting is a patent protective and innovative fitting, which is designed and developed according to international advanced technology.

• MULTEC fittings are made from high quality DZR Brass Fittings (dezincification-resistance brass fitting) with super-long insert, a double O ring system and stainless steel crimp ring.
• Simple Press jointing system results in quick, simple and economical installation.
• MULTEC press fittings are certified to Australian/NZ standards AS4176 & AS2537, and suitable for both Water and Gas.
• The multipurpose crimp fitting is a huge advantage for both the merchant and the installer as stock are reduced and there is no risk in mixing dissimilar fittings.