DWV 88 Degree Bend 100mm

100mm PVC Female Female Inspection Bend 88°

ERA DWV Pipe and Fittings have been tried and tested in the New Zealand Market for over 10 years, we stock a full range of DWV PVC Pipe and Fittings

Our PVC Bends are strong and reliable manufactured from Polyvinyl Chloride Material that is UV stabilised to meet New Zealand Standards

Standards approval :

• AS/NZS 1260:2009 - PVC-UPIPESANDFITTINGS, for drain,waste and vent applications
• WaterMark Certificate of conformity-Level1 No. WMK26022

Features and Benefits:

*Drain,Waste and Vent Pipes and fittings do not support combustion *PVC is not conductive and will not rot,corrode or break down *They are light weight, Making installation cheaper and easier

• The pipes and fittings are sealed with PVC glue or welding compound that creates a water tight and extremely strong bond
• Potable(drinking) water approved *Suitable for some "charged"lines i.e. filling water tanks from gutters

Drain and Installation:

*Your pipe trenches should provide clearance of a minimum of 100mm on each side of the pipe to enable better compaction around the pipe *Check that the pipe and fittings are not damaged prior to installation and the trench is free from debris and sharp objects *Back fill and compact around the pipes *Drain should be installed with a minimum 1:60 for, less by design

Please have a look at our other listings for similar pipe and fittings, we also manufacture Plastic Water Tanks and stock a large range of plumbing fittings

Keywords: DWV PVC Bend 88° 88deg 88degree 88 deg 88 degree upvc pvc-u female female inspection elbow 100mm