JH40011 Submersible Pump with Internal Float - 400W

The JH400-11 has an internal float switch which that allows for installation in small sumps (min size 260mm x 160mm x 330mm deep). It has a mode switch which allows you to select "Automatic" or "Manual" mode. When switched to Automatic mode the pump will start when the water level reaches 150mm and turn off when water level drops to 70mm. When switched to manual mode, the pump will run continuously until power to the pump is turned off. In this mode the scavenger type base allows pumping down to 5mm.

Specifications:

• Max Particle Size: 5mm
• Max Flow: (LPH) 7500
• Flow at 2 metres 5000
• Flow at 4 metres 4200
• Flow at 6 metres 3050
• Max. Height: 8m
• Rated Power: 400 Watts
• Single Phase: 230V
• Body Material: Plastic
• Cable Length: 10 Metres
• Discharge Outlet Size (Multiple) 1", 1 1/4", 1 1/2"

Features:

• Lightweight
• Easy to use
• Can pump solids up to 5mm diameter
• Internal Float switch for run-dry protection
• 10 Metre electrical cord
• 1" and 1 1/4" stepped outlet hose fitting
• Can pump down to 5mm from bottom of sump
• Comes with a Flap Valve
• Weight = 4.6 kg

Applications:

• Pumping out sumps
• Flooded areas
• Emptying swimming pools
• Drawing water from wells

1 YEAR WARRANTY

1 Inch Lay Flat and Clear Suction Delivery Hose Available.

Feel free to phone us to discuss your pump and filtration needs. Our phone and contact details can be viewed at: http://www.trademe.co.nz/stores/pumps-online/contact