Feature

-This is an adjustable pressure switch with a normally closed (NC) configuration. -It can be adjusted using a hex key to set the pressure range from 15 psi to 140 psi. -A relay or solenoid is required to handle the load and protect the switch contacts. -The switch operates in an "Often shut down" mode by default, where the contacts are closed.

To set a specific pressure value, the contacts are disconnected, and power is supplied to the line.

Specification

Type: Air Pressure Switch

Working Form: Pressure Adjustable Installation Connection: External Thread Pressure range: 0.1-1.0 MPA Work tempertature range: -5-60o Connection: 1/8" Rated voltage: 220/120V DC24/12V Current: 0.5A Maximum power: 24VA, 100VA Insulation voltage: 500V, 1500V Maximum working current: 500mA Max pulse count: 200T/min Service life: 1 millions cycles Protection class: IP54

Package Including 1x Diaphragm Type Pressure Switch( brass fittings & Inner hexagon spanner NOT Include )

Note: For proper functioning of the switch, an air receiver (small tank of 500ml or larger) is required, and reliance on line pressure alone should be avoided. To adjust the pressure, please use a hex key to turn the two terminals located in the middle of the Hex.

Note: Sourced From Professional Aftermarket Manufacturer, QUALITY GUARANTEED.