Blue Bar 50 amp Anderson Plug Shell Housing Kit Complete Not being able to source a suitable surface mount for an Anderson Plug to attach to the outside wall of a caravan or camper which would protect the plug from the weather, we decided to design our own.. We knew there were some 3D printed ones in the market but 3D printing material doesn't stand up to the hot sunny conditions when exposed We have also seen some made from an alloy, which I wouldn't like to touch once it has been in the sun for awhile We started with our own design taking into account we wanted a product that could be mounted externally and last, is a slim design, and keeps the weather out of the plug we came up with the Anderson Plug Shell Made from tough UV resistant ASA (Acrylonitrile Styrene Acrylate) it can withstand the harsh sunlight and take a knock or two if travelling through the bush We added two screw or bolt holes to each side so you can make sure the shell is held securely against the surface to help keep water from seeping in. You can add a bead of silicone to the base as well before attaching to further seal it There is plenty of room at the back of the Anderson Plug for the terminal wires to protrude and bend into the wall cavity The 50 amp Anderson Plug Shell comes standard with a grey plug but we can change that to red, blue, yellow or green if required. ** Extra 50 amp Anderson Style Plug not included, display purposes only

Blue Bar 50 amp Anderson Plug Shell Housing Kit Complete An easy and convenient way to surface mount a 50 amp Anderson Plug to the wall of a caravan, camper, canopy Mount it facing down so water and dirt runs over the housing protecting the Anderson Plug inside For added 'water resistance' a bead of silicone could be applied to the base before securing down Made from tough UV resistant ASA (Acrylonitrile Styrene Acrylate) Comes complete with 1 x Shell Single Plug Housing 1 x 50 amp Anderson Style Plug 2 x 50 amp Terminals 6 x Screws to Secure the Shell D...