Specifications:

Rated Voltage: 12V 24V Auto Application: Solar System Controller Current: 10A

Package: 1x Solar panels Battery Charge Controller

For Off-Grid PV Solar System. For 10A 12V Pv System: <50Vdc, 120W Solar Panel,12V Lead-acid Battery. Or For 10A 24V Pv System: <50Vdc ,240W Solar Panel,24V Lead-acid Battery.

SAFETY
1.Make sure your battery has enough voltage for the controller to recognize the battery type before the first installation. 2.The battery cable should be as short as possible to minimize loss. 3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL it is NOT suited for nickel metal hydride, lithium ions or other batteries. 4.The charge regulator is only suitable for regulating solar modules.

PRODUCT FEATURES

1.Built-in industrial microcontroller. 2.One-key setting,digital display,auto memory function. 3.Fully 4-stage PWM charge management. 4.Built-in short-circuit protections,open-circuit protections,reverse protections,overload protection. 5.Dual Reverse current protections, low heat production.

SYSTEM CONNECTION

1.Connect the battery to the charge regulator - plus and minus.it will Show 1 if it detects 12V battery Show 2 if it detects the 24V battery. 2.Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the load to the charge regulator - plus and minus.

The reverse order applies when de-installing! An improper sequence of connection/disconnection might damage the controller

Item 1759B

When Choosing (Combined shipping) The biggest track bag option must be chosen for at least one product.

Making DIY Solar easy as...