Skip to site navigation Skip to main content
main content
  1. Home
  2. Marketplace
  3. Computers
  4. 3D Printers & Supplies
  5. 3D Printing Filaments & Consumables

Description

Please ensure you include a phone number with your order for courier reasons.

Bambu Lab Filament Support for PA / PET - Green 0.5kg - 1.75mm - Easy Support Removal - Recommended for PAHT-CF / PA6-CF / PET-CF / PA-GF - 65500

Support for PA/PET

  • Easy removal by hand
  • Perfect support interface
  • Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
  • Comes with High Temperature Reusable Spool
  • Diameter: 1.75mm +/- 0.03mm Cautions for Use
  • ONLY used for support interface
  • Not used for printing models alone
  • Dry out before use
  • AMS compatible
  • AMS lite NOT Compatible
  • Enclosure Printers Required

RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

Recommended Printing Settings Drying Settings (Blast Drying Oven) 80C,12h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 280 - 300C Bed Temperature (with Glue) 80 - 110C Printing Speed < 100 mm/s Physical Properties Density 1.17 g/cm³ Vicat Softening Temperature N / A Heat Deflection Temperature N / A Melting Temperature 255C Melt Index 29.2 ± 2.1 g/10 min Mechanical Properties Tensile Strength N / A Breaking Elongation Rate N / A Bending Modulus N / A Bending Strength N / A Impact Strength N / A

Details

Condition:
New
Brand:
Bambu Lab
ManufacturerCode:
S03-G1-1.75-500-SPL

Shipping & pick-up options

Destination & description Price
Nationwide 4-5 days, Economy $5.00
Shipping more than one itemNo extra charge

Estimated delivery times in business days

Seller does not allow pick-ups

Payment Options

Pay instantly by card, Ping balance or saved bank account.

What's Ping?

Afterpay

Four fortnightly interest-free payments.

What's Afterpay?

Questions & Answers

No questions have been asked!

Bambu Lab Filament Support for PA / PET - Green 0.5kg - 1.75mm - Easy Support

Closes: Tue 30th Dec, 5:04am
6 days, 21 hours, 40 minutes

Buy Now

$90.30 (each)

Or four interest-free payments of $22.58 (plus shipping) with Afterpay

What's Afterpay?
10+ available
$5.00 cheapest shipping Nationwide
Expected delivery in 4-5 business days

Am I covered by Buyer Protection?

When you make a purchase using Card, Direct Debit, Ping balance or Afterpay we are able to protect your trade under our Buyer Protection policy, up to $2,500.

Learn more about Trade Me's Buyer Protection.

pbtech profile image
pbtech 99.2% positive feedback Seller located in Auckland City, Auckland
Advertisement

About the store

pbtech

99.2% positive feedback
address verified in trade
Location
Auckland City
Member since
Tuesday, 17 December 2002
View Store

Bambu Lab Filament Support for PA / PET - Green 0.5kg - 1.75mm - Easy Support

We are upgrading some of our systems
Learn more