Product specifications

1. Outer diameter after recovery: OD2.5 mm +/- 0,1mm
2. Hole diameter before recovery: OD1.5 mm
3. Pin diameter: OD 1.2 mm
4. Minimum installation temperature: 110°C
5. Max installation time: 60 seconds
6. Standard color: Clear
7. Compliant norms: UL224,MIL-I-23053, GR-1380-CORE, ZN-96 TPSA-006
8. RoHS compliant
9. Packing: 100 pcs per bag

Product features:

1. Keep optical transmission performance of optical fiber
2. Provide safe protection to optical fiber splicing
3. Airproof configuration keeping the splice point's good resistance of humidity and temperature
4. Clear sleeve make it easy to detect splice before shrinkage
5. Easily use and avoid any damages to the optical fiber during installation
6. Operating temperature ranging from -45°C to 100°C
7. Minimum fully recovery temperature : 120 °C
8. Strength member is made from "Full hard" stainless steel of 304 grade and is ground at the edges before polishing to make it completely burr free to avoid rupturing during shrinking. 304 grade gives better corrosion resistance, even in a coastal environment. Resistant to heat shocks, no cracking dripping or flowing
9. Hot melt adhesive tube made from polyolefin Ethyl Vinyl Acetate copolymer bonds both to the fiber and heat shrinkable outer tube to effectively encapsulate fusion splice.
10. Long term proven performance, exceeds industry standards with satisfied customer