RAP-401-9-BC-UN9U - RAM® X-Grip® with RAM® Tough-Claw™ 9" Pipe Mount for 9"-10" Tablets

This bedside or wheelchair mounting kit for 9”-10” tablets includes the large RAM® Tough-Claw™ clamping base, 9” extension pole, swiveling double socket arm, and the RAM® X-Grip® universal tablet holder.

The RAM® Tough-Claw™ attaches with the twist of a knob to bedside rails and bars that range from 25mm to 27mm in outer diameter. Both a 228mm / 9” long extension pole and swiveling double socket arm can be easily adjusted to keep the RAM® X-Grip® universal tablet holder in an ideal viewing and operating position.

If used as a bed mount- when not in use, the tablet holder and extension pole can simply be rotated away from the bed.

Clamping range:

(Rail/Tube Surfaces): 25.4mm to 57mm (1" to 2.25")

(Flat Surfaces): 0mm to 55.8mm (0" to 2.2")

The included -UN9 X-Grip consists of a composite spring-loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet.

The RAM-HOL-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets.

The cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your device with a case/sleeve/skin when determining the overall size. Cradle Dimensions

Minimum Width = 158.75mm / 6.25”
Maximum Width = 205.7mm / 8.1” Max length with supports 260.4mm / 10.25” (unlimited without supports) Maximum Thickness = 22.2mm / 0.875"

Compatible Devices For a list of many of the compatible devices for this cradle go to our listing for the RAM-HOL-UN9U

Overall Height: 26"/660mm

BALL/SOCKET SIZE Bottom of Arm: C Size (1.5") Top of Arm: B Size (1")

LOAD CAPACITY 900g/ 2 lbs

MATERIALS Marine-grade aluminium High strength composite

Weight 630 grams /3.6 lbs.