Used HRV slave fan with galvanised frame. Taken out of home when owner replaced the HRV system with an EVOAQ ventilation system - the main fan had died but the slave fan is still in good working condition. Would be suitable as a fan replacement if your existing HRV slave fan has died but the rest of the system is still working. Fan comes with a long lead so should be able to be plugged into the extension cord end on the main HRV fan directly (depending on how far away the existing fan is).

Fan only. Does not include controller or other control box. No filter included - buyer must supply their own filter. Not sure how old the fan is but the bearings are still good. The galvanised fan case has somewhat corroded but no worse than normal wear and tear after some years of use.

Any questions please feel free to ask.