Priced per meter. This high quality beer line will keep your previous beverage in it's best possible conditoin in the process. This 6mm size is a larger size normally either used for gas or long draw keg systems. Its not recommended for direct draw kegerators as it does not apply much flow resistance. If you did use this beer line in your kegerator you will need about 6-8meters of beer line to get the adequate flow resistance and for this reason we would normally recommend the smaller 5mm or 4mm ID lines for Kegerator setups. This type of line is quite commonly used with the icebank systems or temprite systems. It's a very common size for long draw keg systems where lower line resistance is desirable. 6.3mm ID - 9.5mm OD Pressure Rating (with 1.5safety factor) 30C - 1.4 MPa (200psi) 50C - 0.7MPa (100psi)

NO PO BOXES

Please note we can not ship to PO boxes. To avoid delays please provide a valid shipping address for us to ship to when completing your purchase.

COMBINED SHIPPING

If you buy multiple products please select the appropriate shipping option on the largest item and select the "Combine shipping" option on the other items. Please understand that we will contact you for extra payment via email and hold shipping on your order if you underpay shipping.

"Shipping more than one item" means you don't pay extra shipping for buying more than one item of the same type (you change the quantity to more than 1) - it does not mean you get free shipping.