Tree Stump Remover Commercial.

Cut off as much of the top of the stump as possible. Using a 20mm speed-bore bit, drill 20mm holes around the perimeter of the stump approx 200mm deep and 50mm back from the rim of the stump. More holes the better.

You simply pour the Tree Stump Remover into drilled holes and fill the holes with water. The stump will become pretty spongy after four to six weeks.

Then you can break out the rotten wood with an ax.

Product breaks down naturally in the soil.

Tree Stump Remover will work only on seasoned (older) stumps, not freshly cut (green) tree stumps and is not suitable for Yukkas and similar trees.

Product is in a resealable bag. weight approx 1.850kgs.

The above information is for this product only and may not work with inferior untested products.