How to tension spring

What you receive?

1 x Complete Uncut Key

Please Note: Two types of key blade exist for this key style, please ensure your key is identical

Please Note: Our products are aftermarket and not provided with logos

What is not included?

• Programming
• Key Cutting

Is this compatible with my car/key?

Yes, if your key is one of the following models below and your current key/remote looks identical to the product pictured in the main image.

Frequency: 433MHz

Blade Type: FO21 Tibbe

Transponder Type: 4D ID63

Compatible With:

• Fairlane (2003-2005)
• Fairmont (2002-2005)
• Falcon (2002-2005)
• Territory (2004-2005)

Instructions (Buttons):

1. Sit in the car with your keys and remotes ready
2. Close the driver side door
3. In less than 10 seconds of closing the door, insert the key into the ignition and turn the key to the first click (accessories position) which will turn on the radio
4. In less than 3 seconds of turning the key, press the rear demist button 3 times
5. If done correctly, the door locks will cycle. If the door locks do not cycle, start the process again and try completing the steps faster or slower.
6. Once in learn mode all existing remotes will be deleted from the cars memory. Click any button on the remote until you hear the door locks cycle. Once the locks cycle this confirms the remote has been accepted into the cars memory
7. Repeat the last step for each remote (if you have more than one)
8. Remove the key and step out of the car and test each button on the remote is performing its proper function

Instructions (Transponder):

Please Note: You will need to have 2 original working keys if you wish to program the transponder chip with the procedure below.

If you only have 1 working key it will need to be programmed by a locksmith (the procedure listed below will not work) ensure you have al...