Specification Material: PC Capacity: 1.5L Dimensions: 22x12x12cm Hydrogen concentration: 1200ppb-2400ppb Battery capacity: 1500mAh Hydrogen production time: 6 minutes Number of hydrogen production: 10 times Charging method: USB Package Included: 1 x Portable Pot Features:

1. Before use, test the water first. As the pot body and lower base are separate, water leakage may occur during transportation due to bumps. Unscrew the base, check the rubber pad, and tighten it again.
2. Do not use hot water above 80 degrees Celsius. It is best to rinse twice with water at 50 degrees Celsius to achieve 40 degrees Celsius. Otherwise, if it exceeds 45 degrees Celsius, hydrogen will evaporate immediately.
3. It is recommended to use water containing minerals for the best results. Beverages excluded.
4. Do not approach the ignition source during hydrogen production.
5. The number of hydrogen production times should not be too high (1-2 times is the best) to prevent the pressure from being too high, which may cause the base to leak.
6. When producing hydrogen, when the milky white bubbles dissipate, it should be consumed for about 2 minutes before drinking. The taste is better.
7. If you forget to drink after electrolysis, you can repeat electrolysis to increase the hydrogen content in the water for better results