Booster: 1:5 Controller Rated Voltage: DC 36V/48V Controller Maximum Current: 30A Controller Speed Setting: 1-4.2V Controller Brake Input: Low Level Applicable Motor Power: 1000W

Instrument Environment Setting Instructions: P01: Backlight Brightness Level 1 is the Darkest and Level 3 is the Brightest; P02: Mileage Unit, 0: Km: 1: Mile; P03: Voltage Level: 24v 36v 48v 60v 64v (default 36v) P04: Sleep Time: 0, No Sleep. Other Numbers Are Sleep Time, Range: 1-60 (in Minutes). P05: Help Gear: 0, 3 Gear Mode, 1, 5 Gear Mode. P06: Wheel Diameter: Unit. Inches; Accuracy: 0.1; This Parameter is Related to the Display Speed of the Instrument, and Needs to Be Entered Correctly. P07: Speedometer Magnet No.: Range: 1-100.

Note: P09-P15 Menu is Only Valid in Communication State. P09: Zero Start Non-zero Start Setting, 0: Zero Start. 1. a Non-zero Start. P10: The Drive Mode is Set to 0: Power Drive (how Much Power is Output is Determined by the Power Gear, the Switch is Invalid). 1: Electric Drive (driven by Turning the Handle, when the Power Gear is Invalid). 2. Electric Drive and Electric Drive Coexist. P11: Help Sensitivity Setting Range: 1-24. P12: Help Start Strength Setting Range: 0-5. P13: Power Magnetic Steel Disk Type Setting 5, 8, 12 Magnetic Steel Type. P14: Controller Limit Value Setting Default 12a, Range: 1-20a. P15: Controller Under voltage. P16: Odo Reset Length Press 5 Seconds to Reset Odo to Zero. P17: 0: Disable Cruise, 1: Enable Cruise. Auto Cruise Optional (only Valid for Protocol 2). P18: Display Speed Ratio Adjustment, Range: 50% ~ 150%. P19: 0 Power Bit, 0: 0, 1: Excluding 0. P20: 0: 2 Protocol 1: 5 S Protocol 2: Standby 3: Standby.

Package List: 1 x Controller 1 x Controller Wiring Instructions 1 x Meter 1 x Instrument Manual

Note: Use the product that complies with the communication protocol.

The delivery time is around 10-20 working days after your purchase