Kogel Hybrid bearings use premium grade Silicon Nitride (Si3n4) Bearings and premium hardened steel bearing races which are mirror polished to perfection. The result? A long lasting, smooth bearing which provides less resistance and is less prone to failures. These bearings are rated to the Grade 3 / ABEC 5 level - built to spin with minimal friction.

This bottom bracket is the same as Kogel's PF30, but with a shallower insert depth. Their standard PF30 bottom bracket uses a deep insert for the strongest possible connection to the frame. This causes problems on some metal frames with wires running into the chain stay or with the internal cable guides on some frames. For these frames Kogel have designed the PF30-L, same bottom bracket minus the insert guide and a few mm of contact area.

This bottom bracket fits specifically on many metal frames, the 2017 Cannondale SuperSix or Cervelo P5 series.

Choose road bearings for road bikes, cross bearings for mountain bikes and cyclocross. * Low Insert casing allows for easier internal cable routing

• Fits any BB30 crank on a PF30 frame
• Fitment: 46mm diameter
• Shell Width: 68mm
• Spindle: 30mm
• Compatibility: BB30 Cranks, BB386 Cranks (with Spacers)
• Road Seals (Blue)

This Bottom Bracket allows fitment of the following systems...

• 386EVO (46 x 86.5mm) Shells to BB386 Cranks
• BBRright (46 x 79mm Offset) Shells to Factory Cervelo BBRight Cranks
• PF30 Shells (46 x 68/73mm) to BB30 Cranks
• PF30A Shells (46 x 73/83mm Offset) with factory Cannondale Cranks
• Use of all 46mm Shells - with use of aftermarket spacers

PLEASE NOTE: Purchasing this item may incur NZ customs import duties. See our Store Page for further information. DELIVERY: Please allow 5-10 working days for postage.