Ultramount JR has the same beefy 3\16" thick steel construction as the standard Ultramount, however, JR is only 7 1/2" tall instead of 9 5/8". Footprint is 11.5" wide by 9" deep. Standard Ultramount plates cross over to Ultramount JR as well, so you can swap top plates if you choose to.

(Note) With Ultramount JR being only 7 1/2" tall, some press linkages will hang below the benchtop to impede opening of cabinet doors or drawers (If you have them) below your bench. If you have any doubt, before placing an order, measure the linkages hanging down below your bench top and subtract 6".

If you want to have the press completely on top of the bench, the standard 9 5/8" tall Ultramount will fix you up perfectly.

!!Required!! This base set up is to be used with our quick change top plates. You need one top plate per item you wish to swap in and out. We can supply top plates for your particular press/es, just email us or ask a question

Swapping out presses/tools takes less than 30 seconds and requires no tools.

(Kit includes, legs,quick change base plate and hardware.)

GST receipt provided by Magnum Imports NZ ltd All items are available for pick up from The Gunshop, Upper Hutt.