Tamiya item 77502 - British Battleship Rodney - 1/700 scale Battleship/ Cruiser Navy Military Series assembly kit #77502 British Battleship Rodney - Tamiya 1/700 About the British Battleship Rodney The Rodney was laid down in December 1922 at the Birkenhead yard of Cammell-Laird & Co. She was launched on the 17th December 1925 and completed in August 1927. Her armament consisted of nine 16-inch guns in triple turrets all sited forward of her bridge. Twelve 6-inch guns in twin turrets, six 4.7 inch A.A. guns and eight 2 pounder pom-poms. Also two submerged torpedo tubes housed one on each beam forward below the lower deck line. It is interesting to note these torpedos were of the 24.5 inch type common in the Japanese Navy, but unique to the Rodney and Nelson within the Royal Navy as were their 16-inch guns. In order to save weight extensive use was made of new materials in her construction, such as light weight steel, aluminium, fir for her deck in place of the traditional teak, and plywood for many internal non structural bulkheads and fittings, all of which was fireproofed. Her completed displacement was 33,950 tons over a thousand tons under the limit imposed. Rodney and Nelson were the first British warships to have a tower bridge and mast, also the first to have flush decks since the "Lord Nelsons" of 1908 and have their engine rooms forward of the boilers. As protection she carried a 14-inch armour belt along her beam which ran from slightly ahead of her fore turret aft to her steering compartment. Her main turrets carried armour 16-inches thick except for their backs which were 9-inch plate, the barbettes were of 15-inch plate and her middle deck A.P. was 6 1/4 inches thick over her magazines, varying to 3-inches over her machinery spaces. She was powered by Brown-Curtis geared turbines driving two shafts and her machinery was supplied by her builders. These gave her a speed of 23.5 knots for 46,000 H.P. at her standard displacement on trials, though this speed was seldom attained in servi...