Save some money on sodastream fills. Fill your own sodastream bottles direct from your own co2 cylinder - or purchase a co2 cylinder or fire extinguisher to go with this unit.

Easy to use and safe with 2x ball valves to release pressure in each part of the line. No need to turn the valve on and off each fill and much more control with the speed of fill with the ball valve handles.

This fits NZ/AU threaded sodastream bottles only and NZ Co2 cylinders (type 30 or w21.4) not CGA320. For quick connect sodastream or oh bubbles cylinders you will need our quick connect filling adapter.

Usage:

READ ALL STEPS AND FOLLOW PRECISELY FOR SAFETY

1. Attach fill station to Co2 donor cylinder nice and tight. The gasket on the filling station will seal on the co2 cylinder. (spares included if you ever happen to loose it)
2. Attach black end of filling station to the sodastream cylinder nice and tight. make sure you use 1 clear disc supplied (spares included) and place inside the black adapter - this is the seal gasket and is needed to make sure there are no leaks. - stand the sodastream bottle somewhere SAFE / SECURE so it does not fall.

Don't loose the clear discs - we have given you 2 just in case. We suggest taping the bag to the hose so you always have them together.

1. Make sure both red handle are turned off - 90 deg to the body of the filler
2. Screw down the gold knob to engage the sodastream pin
3. Open the co2 donor cylinder or fire extinguisher and keep open
4. VERY SLOWLY open the red handle closest to the co2 donor cylinder - you will hear the co2 start to transfer. Once it is transferring for 5-10 sec you can open the valve up a little more to speed up the fill. NOTE #1 - You must start the fill VERY VERY SLOWLY to freeze the sodastream one way valve open. If you start the fill too fast the valve will lock shut and no co2 with transfer. Note again - VERY SLOWLY - work...