1/2 Inch BSP Super Sucker Self Priming Siphon Transfer Pump

• Transfer beer, wine, cider, and spirits between vessels without the hassle of starting a siphon.

The Super Sucker transfer pump is the quickest, most hassle-free solution to moving beer, wine, cider or spirits between vessels. Rack from the primary fermenter to secondary or from carboy to keg without the excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood.

Simply run transfer tubing from a racking cane to the pump and then to your receiving vessel, flip the switch, and let the Super Sucker do the work while you kick back and enjoy a cold one.

With the Super Sucker, you don't need gravity or CO2 pressure to move the liquid around. Thanks to the pump's considerable max lift height, you can leave your heavy, full fermenter on the ground and place the receiving keg or carboy side-by-side or even above the fermenter on a countertop.

The 1/2 Inch BSP inlet and outlet are perfect for use with 1/2 Inch push in fittings such as our:

• duotight - 9.5mm (3/8") Female x 1/2" Female Thread

It is important to remember to clean thoroughly and store dry to avoid potential sites of infection. We would recommend flushing/recirculating with a diluted mix of StellarSan for at least 2 minutes of contact time prior to using this pump.

Features: Self-Priming 1/2 Inch BSP Inlet/Outlet On/Off Switch Max Flow: 4.23 L/min Suction: 127mm Max Lift: 3.8m Maximum Temperature: 60°C Pressure: 90 psi Voltage: 12V DC (3.5A) Power Cord Length: 1.2m Power Adaptor Cord Length: 70cm Power Switch Cord: 25cm