*PLEASE NOTE - DOES NOT INCLUDE KEG, TAP, REGULATOR OR DISCONNECT. Image is for reference of remote line in use.

This is all you need to attach a sodastream cylinder to your 2.0 Mini Keg setup. Includes: 1m Gas Line, Sodastream Adapter, 2x 8mm Push Fittings & MFL union

This remote gas line is only compatible with the iKegger 2.0 Regulator (which has a different size outlet to our previous regulator. The iKegger 2.0 regulator also comes with the pictured steel disconnect and a one-way valve in the box, these are not part of this package).

The remote gas line comes with the adapter that most people want in our years of experience: the Sodastream adapter. This allows using a 400g Sodastream gas bottle as a source of CO2 instead of disposable bulbs. These are available everywhere and cost about $25 to swap at Supermarkets or Hardware stores or Briscoes etc.

The remote gas line goes between your keg and regulator allowing you to have them separate. Most of our kegs don't fit a SodaStream gas bottle easily directly on them so it's necessary to use the line to separate it from the keg. Because of the one-way valve included in the iKegger 2.0 regulator box you can lie the keg down and liquid can't go up the gas line to damage the regulator.

Accessories: (sold separately)

The M10 Nitrogen 2.2L Gas bottle adapter allows using larger disposable gas bottles that have an m10 thread on them. You can get CO2, Nitrogen or Argon. (2.2L and 1.43L)

Barbed adapter for original mini reg (8mm thread) allows you to use this remote gas line on our original mini regs that have an 8mm outlet thread. (push the hose onto this barbed adapter)

MFL adapter for original mini reg (8mm thread) Also allows you to use this remote gas line on our original mini regs via a threaded connection + the push fittings included with the remote line.

Other Accessories: Drip Tray / Bar Mat: Mini Size Drip Tray: Mini Keg - Keg Stand - Anti-roll mat: iKegger 2.0 Button Clip iKeg...