Features:

Real-time data transmission without any time delay.

Ability to set 7 different ID codes.

Portable and easy to handle.

Cost-effective.

One transmitter can

Specification:

Type: DMX Controller

Connectivity: Wireless

Input voltage: DC 5V 0.5A

Communication distance: 300M (visible distance)

Work frequency section: 2.4G ISM, 126 channels, frequency section

Max transmitting power rate: 20dBm

Receiver Sensitivity: -94dBm

CPU: 32-bit ARM Core

Modulation: GFSK

DMX Signal Interface:RS485

Operating temperature: -40 ~ 85 Celsius

Storage Temperature: -65 ~ 150 Celsius

Ambient Relative Humidity: 5 to 95% (non-condensing)

Automatic Reboot Trigger: Built-in WDT (watchdog timer)

Technical Parameters:

Tricolor LED display.

Automatic frequency hopping across 126 channels for high anti-jamming capability and reliable operation.

Settable ID codes with 7 groups, allowing multiple wireless systems to work simultaneously without interference.

Input voltage: 5VDC 500mA minimum.

Communication distance: 500 meters.

Operating frequency range: 2.4GHz ISM band with 126 channels.

Maximum transmitting power rate: 23dBm.

Receiver sensitivity: -94dBm.

Signal ports: 3-pin male plug (for transmitter) and female plug (for receiver).

Operating Manual:

ID code and corresponding LED colors:

1: RED

2: GREEN

3: YELLOW (RED + GREEN)

4: BLUE

5: PURPLE (RED + BLUE)

6: CYAN (GREEN + BLUE)

7: WHITE (RED + GREEN + BLUE)

Press the key once to enter ID setting mode, press again to set the ID value, and continue pressing to increment the ID value.

Working Conditions:

Constantly lit LED: No DMX or wireless signal detected.

Flashing red LED: Transmitter is transmitting.

Flashing green LED: Receiver is receiving.

RF frequency range: 2.400-2.525GHz, total of 126 channels, automatically searching.

ID Codes: ...