Polyx®-Oil Raw slows down the yellowing of timber Food safe when cured Nearly invisible appearance – no “permanent wet effect” Matt finish Extremely durable and hard wearing Resistant to common liquid spills such as water, juice, tea, coffee and wine Suitable for children’s toys, cots and bassinets Microporous breathable finish which does not crack, peel or flake Interior use only Coverage approximately 24 square metres per litre with one coat No of coats: 1 coat plus one coat of clear Polyx®-Oil Drying time: 8 – 10 hours Osmo white tints: Polyx Oil White tint 3040 = 2% pigment (Full strength) Polyx Oil Natural 3041 = 1% white pigment (Half strength) Polyx Oil Raw 3044 = 0.5% white pigment (Quarter strength) Polyx®-Oil white oils are designed to reduce/slow down the natural yellowing of timber. They each contain a quantity of white pigment, which may slow down the yellowing of the wood from UV light. Depending on the strength of pigment, the effect on the timber will range from nearly invisible to a soft white. They are best suited for use on light coloured timbers such as Oak, Pine, Macrocarpa, Spruce, Douglas Fir (Oregon) etc. Also ideal for use on light coloured plywoods such as Plytech Birch Elite etc. White tints are not recommended for use on darker timbers such as jarrah, kwila, teak and heart rimu etc, as the oil may give the timber a white chalky appearance. We recommend doing a test first to determine suitability.