SAMPLE IMAGE ONLY - LISTING IS FOR A 10L DRUM Lightly tinted Polyx®-Oil providing a light coloured effect Food safe when cured Provides a light washed effect to even out the colour of the timbers grain Resistant to common liquid spills such as water, juice, cola, coffee, tea and wine. Suitable for use on children’s toys, cots and bassinets Microporous breathable finish which does not crack, peel or flake Easy to spot repair Polyx Tints are lightly tinted and transparent, allowing the timber’s natural grain to remain visible. Interior use only Coverage: Approximately 24 square metres per litre with one coat No of coats: 1 coat of Tint followed by 1 top coat of clear Polyx®-Oil Drying time: 24 hours Polyx®-Oil Tints is normal Polyx®-Oil which contains a small amount of coloured tint. It should not be considered as a product for deep staining of your timber, but as a finish which will create a light, even colour tone to the timber’s grain. For example, the Polyx®-Oil white tint, will reduce the yellowness of a timber such as macrocarpa, as well as reducing variations in grain colour to provide a more harmonious finish. Suitable for use on timber floors and furniture and general interior timbers such as sarking, doors and paneling. Polyx®-Oil Tints is suitable for use on timbers to which normal Oil can be applied. It is not recommended for use on timbers with high oil and resin content such as Matai, Totara, Kwila or Spotted Gum. Normally, one coat of Polyx®-Oil Tints is applied, followed by one coat of clear Polyx®-Oil (Gloss, Satin, Semi Matt or Matt). 2 coats of Polyx®-Oil Tints can be applied as a stand alone finish without the need for a clear top coat. Where a stronger colour is required, we recommend using either OSMO Woodwax Finish or Oil Stain rather than Polyx®-Oil Tints. In all cases a trial test to determine suitability is recommended.