Flue for 10L, 12L Challenger Califonts – 90 Degree Elbow

If installing a Challenger califont inside, they must be installed with adequate ventilation to the outside. This can be done by purchasing a flue to suit your califont. The flueing process can be done with either a 90° Elbow or through the roof. A weather cap is also available to help stop water coming down the flue.

• 115mm diameter 90 degree flue elbow
• Straight flue is approximate 250mm in length
• Elbow and Straight flue detachable

NOTE: This flue is only applicable for 115mm diameter chimney. We highly recommend having a weather cap to go with the flue for protection against water and outside debris.

Part No. 34057E