Permatex Fuel Tank Repair 28g (1oz)
Description
Permatex Fuel Tank Repair 28g (1oz)
A two part, hand kneadable, putty type epoxy stick used for repairing metal gas tanks and containers. The cured adhesive can be drilled, sanded, threaded or filed and it is resistant to fuels and most solvents after full cure.
Automobile Suggested Applications: Can be used on: Gas tanks and gas cans.
Directions:
- To achieve optimum adhesion, clean grease or dirt off surfaces to be repaired.
- Wearing gloves, twist or cut off required amount.
- Mix by kneading epoxy stick to a uniform color. If mixing is difficult, warm epoxy stick to room temperature or slightly above.
- Apply to the repair surface within 30 minutes of mixing, forcing into any cracks or holes to be filled. Remove excess material with a tool moistened with clean water before hardening begins.
NOTE: when applying to a damp, wet or slowly leaking area, work the mixed epoxy into the surface ad apply pressure until adhesion begins to take effect. Fuel Tank Repair epoxy sets in 1 hour, can be machined in 5 hours and fully cures in 24 hours. DOES NOT ADHERE TO POLYETHYLENE OR POLYPROPYLENE PLASTICS. THIS MATERIAL IS NOT INTENDED FOR STRUCTURAL BONDING.
NOTE: Permatex Fuel Tank Repair is NOT for use on plastic fuel tanks. (Polyethylene and Propylene) Or for structural bonding.
Shipping Options
Enjoy fast daily shipping with NZ Post's Courier Service.
For your safety and the best performance, please have all mechanical parts installed by experienced professionals.
Questions & Answers
Buy Now
$18.90

