BC ADJUSTABLE SUSPENSION CAMBER BOLT KIT 14MM

Description

These 14MM bottom clevis camber bolts are a great option for those looking to get some camber adjustment out of their Suspension to help fix Camber issues from lowered cars

Installation -

Take alignment readings and determine amount of camber change needed.
Raise vehicle by body pinch welds. Remove tire and wheel assembly.
Remove the upper strut-spindle bolt.
Line up small tab with cam on bolt. Install bolt with large tab out toward wheel for positive camber or in away from wheel for negative camber. Install the camber bolt into strut whole making sure the small tab on the washer is in the hole and the washer is flush on the strut. Add lock nut, snug, but do not tighten. Loosen the lower bolt.
Reinstall tire and wheel assembly and recompensate alignment equipment. Rotate the camber bolt to obtain desired camber reading. *Torque bolts do not exceed 77Ib-ft (105Nm) Do NOT use air/impact wrench. Always check for proper clearance between suspension components and other components of the vehicle.
Complete alignment and road test vehicle.

CAUTION This part should only be installed by personnel who have the necessary skill, training and tools to do the job correctly and safely. Incorrect installation can result in personal injury, vehicle damage and/or loss of vehicle control. Changes camber and/or caster up to ±1.75 degrees

BC - BR GOLD's - Sports Adjustable Coilovers are an advanced well produced alternative to the many Brands in our market today sharing features much more advanced than the competion.

BC Suspension are World Wide Known and are well Established in the Motor Sport World wide.

Redline Performance is the OFFICIAL BC Appointed Distributor for BC SUSPENSION in NZ.

REDLINE PERFORMANCE - Item Listed is " Compatible for use with " item Title and or Advert Make Model description if stated . Located Mount Roskill - Auckland Auckland Shipping Costs Does NOT include Waiheke Island