ROCKFORD P1-1X12 + R2-500X1 MONOBLOCK AMP DEAL! GREAT COMBO

WE ARE A NZ BASED COMPANY https://drivingsound.co.nz/ RRP $1149

The P1-1X12 is a single P1 12” vented enclosure with 250 Watts RMS power handling wired to a 4-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet.

Woofer Quantity 1 Woofer Size 12? Enclosure Type Vented Speaker Connector Up to 10 AWG compression terminal CEA-2031 Compliant CEA-2031 Guidelines Woofer Series Punch P1 (P1S4-12) Nominal Impedance (ea) 4-Ohm Internally wired to create a 4-Ohm amplifier load Power Handling (Watts RMS) 250 Watts RMS 500 Watts Max Enclosure Material 5/8? MDF (Medium Density Fiberboard) Dimensions Box (H x W x D) Wedge (H x W x D1 x D2) 15.125? x 19.125? x 15.75? (38.4cm x 48.6cm x 40cm) PLUS Prime 500 Watt Mono Amplifier R2-500X1 CEA-2006 GuidelinesCEA-2006 Power Rating 300W x 1 @ 4? =1.0% THD+N Number of Channels 1 Total Power (Sum of Rated Power) 500 Watts Rated Power (RMS Continuous Power) 300 Watts x 1 @ 4O 500 Watts x 1 @ 2O Dynamic Power (PVC/PowerCube®) 350 Watts x 1 @ 4O 590 Watts x 1 @ 2O Bridgeable No Frequency Response 20 Hz – 250 Hz Input Sensitivity Low-Level: 150 mV – 4 V High-Level: 450 mV – 12 V Circuit Topology Class Class D Efficiency (average) Total Harmonic Distortion (THD+Noise) 4O: <1.0% 2O: <1.0% Signal Input Low-Level: 2 RCA High-Level: 4-Pin Molex Signal Output Low-Level: 2 RCA (Pass-Thru active with RCA or Hi-Level input) Tone Controls 0 to +18 dB @ 45 Hz Crossover Controls Low-Pass: 50 Hz – 250 Hz @ 12dB/Octave ButterworthInfrasonic: 15 Hz – 40 Hz @ 12dB/Octave Butterworth Remote Controls Yes 4 AWG Power Input Connector Compression Terminal Block Speaker Wire Gauge 8 AWG Speaker Output Connector Compression Terminal Block Cooling Convection Heatsink Operating Voltage 9 – 16 VDC Recommended Fuse (not included) 80 A Average Current Draw (13.8V Music) Max. Current Draw (13.8V Sinewave) 52 A Dimensions (H x W x D) 1.9? x 6.8? x 8.5? (4.9 cm x 17.3 cm x 21.5 cm)